联系电话:021-62576743
新闻资讯
产品推荐
联系我们

地址:上海市武宁路350号联合大厦2016室

电话:021-62576743

传真:021-62576743

手机:13901894268

邮箱:sales@b2light.com

您现在的位置:主页 > 新闻资讯 >

中央空调智能节电控制装置

详细

中央空调智能节电控制装置



   该装置是通过调节电路的电压、电流的幅度,降低灯具和线路的工作温度,最大限度地降低灯光照明电路的电耗,从而达到节电目的。并且可以延长灯具的使用寿命,减少灯具烧损造成的费用开支,大幅度降低用电成本,所节省的电费可为用户带来可观的经济效益。

The device is designed to lower the working temperature of lamps and circuits so as to minimize the power consumption of lighting circuits through adjusting the ranges of voltage and current, thus achieving the purpose of saving electricity. Additionally, it is able to prolong the service life of lamps, decrease the expense caused by the damage of lamps, and greatly reduce the electricity cost. The electricity expense saved is indeed considerable.

   智 能照明节电控制装置是一种高科技的智能设备,以现代控制理论为基础,采用最先进的计算机控制方式,产品主控单元采用高位数的微处理器,高速实时采样市电电 网各种不同状态,所以在使用过程中,无论出现何种情况,该装置输出的始终是最优的电压,整个过程无需任何人为调节。由CPU自动采样、保持、信号处理、判 断,自动输出最优电压。主控单元的EEPROM存储自身重要数据,保证精确输出最优电压。时钟控制单元采用高精确RTC,具有集成的TCXO和晶体,即使 是在停电的情况下,仍然可保持精确计时,保证数据不会丢失。

Intelligent lighting electricity-saving control device is of high technology and intelligence and employing the most advanced computer control on the basis of modern control theory. The high-order digit microprocessor adopted in the master control unit of the product samples different statuses of the municipal power grid at high speeds and real times. Therefore, in any situation, the device always provides the optimum voltage in the using process, which is not subject to any artificial adjustment. The CPU makes automatic sampling, reservation, signal processing, and judgment, and generates the optimum voltage. EEPROM of the master control unit stores some important data, and ensures the accurate output of the optimum voltage. The clock control unit adopts the highly precise RTC provided with the integrated TCXO and crystal, which is able to keep the time accurately and prevent the loss of data even when there is a power cut.

   

ILC智能照明节电控制装置原理图  

Schematic Diagram of ILC Intelligent Lighting Electricity-saving Control Device

     

77

 

时控单元 time control unit
显示控制单元 display control unit
电源 power source
滤波及浪涌抑制单元 Filtering and surging restraining unit
节能功率单元 Power-saving unit
灯具负载单元 Lamp load unit
交流采样单元 AC sampling unit
通讯单元 communications unit
嵌入式微处理器 embedded microprocessor


产品特点 
Product features
 
实时采样市电数据,自动输出最优电压,可以大量节约电能,节电率高达15%—35%。 
 主回路采用特制元器件,动态多级平滑调节及稳定三相电压,灯光无闪断,对电网无谐波污染,绿色环保,延长灯具使用寿命。
 三相设备每相可独立调节,可操作性强,且保证单相的故障绝不影响其它两相的正常运行。 
 具有过压、欠压、过流保护及自动报警功能。 
 任意一相负载电流过流时,系统自动旁路,负载电流恢复正常,系统自动复位。 
  
Sample data of municipal power grid at real times, offer the optimum voltage automatically, and save the power by 15% to 35%.
 The main loop employs the especially manufactured component, dynamic multi-level smooth adjustment, and stable three-phase voltage, which are able to offer continuous lighting, eliminate harmonic pollution to power grid, and prolong the service life of lamps.
 Each phase of the three-phase equipment can be adjusted independently, and the failure of a phase will not affect the normal operation of the other two.
 Possess the functions of overvoltage, under-voltage, and overcurrent protection, and automatic alarming.
 When the load of any phase is in the overcurrent state, the system will have an automatic bypass. The load current restores to the normal level, and the system is reset automatically.
 
 
具有手动强制旁路功能和故障旁路功能。 
 利用时钟管理模块, 可控制灯具启动和停止时间,且每个月份的开关机时间可以单独设置。 
 人机交互方便、安全、智能控制,实时显示各相电压、电流。 
 具有强大的记忆力功能,在断电后保证系统配置参数不丢失。 
 具有RS232通讯接口,方便数据设定和传输。 
 具有故障记录功能,最多可以记录100组故障信息(如:某年、某月、某日、某时、某分+故障编号) 
 配备路灯监控系统,支持RS485总线通信、电话语音通信、GPRS或GSM无线宽带通讯方式。(可选) 
 
 Possess the manual compulsory bypass and failure bypass functions.
 With the clock management module, the device can control the starting and stopping times of lamps, and the on-off times in each month can be set up independently.
 Intelligent and safe control of man-human interaction, and real-time display of voltage and current of each phase.
 The powerful memory function ensures the preservation of system configuration parameters after power cuts.
 The RS232 communication interface is convenient for data setup and transmission.
 With the failure recording function, the device is able to record 100 groups of failure information at most (for
 example: a year, month, day, hour, minute + failure number).
 The device is provided with lamp monitor system supporting RS485 bus communications, telephone voice
 communications, GPRS or GSM wireless broadband communications (optional).


应用范围
Application scope 

 市政照明
Urban lighting 
 城市道路、高速公路、街道广场、隧道、桥梁、城市亮化工程 
Urban road, expressway, street square, tunnel, bridge, and urban lighting project;
 商业照明
Business lighting 
 商场、超市、宾馆、酒店、写字楼 
Marketplace, supermarket, hotel, restaurant, and office building;
 公共照明 
Public lighting 
政府机关、办公大楼、银行、医院、学校、车站、码头、地下停车场、加油站、体育场馆、度假村、智能商住小区等 
Governmental organ, office building, bank, hospital, school, station, dock, underground parking lot, filling station, stadium, holiday reserve, and intelligent community
 工厂照明
Factory lighting 
纺织、造纸、石油、化工、电力、服装、食品加工厂等 
Textile, papermaking, petroleum, chemical, electricity power, garment, and food processing plants;
 交通运输及其他行业照明
Lighting for traffic and other industries
 部队、铁路、民航等 
Army, railway, and civil aviation;